Portable Solution Estimator Suite

Scenarios

Scenario name

Notes / assumptions

Sort equipment:

Load Summary & Generator Sizing

Total connected load (all items) 0.00 kW

Recommended generator (80% max load) 0.00 kW

Generator sizing uses: Gen kW = Total Load / 0.8 (80% loading rule). Filtered view load is for analysis only and does not replace the all-items planning total.

Check Against Available Generator

CHECK INPUTS

Available generator capacity

% of available capacity used

0.00 %

Green: < 80% (Within Safe Range)
Orange: 80–100% (High Load)
Red: > 100% (Overload)

Fuel & Runtime Estimate

Fuel Tank Capacity (Gallons)

Gallons

Consumption Rate (Gal/hr per kW)

0.00 Gal/hr per kW

Approximate Runtime (Hours) 0.0

Rate adjusted by load: < 25% | 25–50% | 50–75% | > 75%.

kW values are approximate. Confirm nameplate ratings and motor starting (kVA) with manufacturer data.

Scenarios

Scenario name

Notes / assumptions

Sort equipment:

Running kW is continuous power. Items with PF < 0.95 and kW > 0.1 are treated as inductive loads and trigger a 4× kVA starting surge — see Peak kVA column. Peak kVA drives generator capacity.

Load calculation summary

Total running load (kW, all items) 0.00

Total running load (kVA, all items) 0.00

Filtered view load (kW) 0.00

Filtered view load (kVA) 0.00

Peak starting kVA (critical) 0.00

This drives the minimum instantaneous generator rating.

Safety factor for continuous load ÷ 0.8 (kW/PF)

Recommended generator size (kVA) 0.00

Final size must meet both peak kVA and recommended kVA.

Generator capacity check

Required capacity check

CHECK INPUTS

Actual generator size (kVA)

kVA

kVA margin (remaining kVA)

0.00 kVA

Margin = generator size − total running kVA.

Fuel & runtime estimate

Fuel tank capacity

Gallons

Consumption (per kW)

Gal/hr per kW

Approximate runtime 0.0 hours

Based on total running kW. Actual runtime varies with load and conditions.

Scenarios

Scenario name

Notes / assumptions

Deployment Parameters

Deployment Length (Days):

Expected Number of Beds:

Buffer Percentage (%): Add percentage buffer to water quantities (e.g. 10 for 10%)

Water Use (per bed per day)

Estimate potable demand and wastewater output per bed per day using field-planning references (MSF/WHO/Sphere).

Potable water (Gal/bed/day):

Wastewater output (Gal/bed/day):

Storage Configuration

Potable water

Number of containers:

Capacity per container (Gal):

Wastewater

Number of containers:

Capacity per container (Gal):

Supply & Disposal Mode

Potable water supply:

Wastewater disposal:

Estimated Totals & Schedule

Potable water

Total demand (deployment): — Gal

Per day: — Gal/day

Water deliveries: —

Potable container storage:

Mains supply status: —

Recommended emergency stored water (48 hours): — Gal

Wastewater

Total output (deployment): — Gal

Per day: — Gal/day

Pickups needed: —

Wastewater container storage:

Wastewater disposal: Discharged to mains — no pickups required

Scenarios

Scenario name

Notes / assumptions

Deployment Parameters

Deployment Length (Days):

Expected Number of Beds:

Buffer Percentage (%): Add percentage buffer to quantities (e.g., 10 for 10%)

Consumables Requirements

Sort: Min Qty: Non-zero only

0 items loaded

Load Ward Consumables or ICU Consumables above.

Scenarios

Scenario name

Notes / assumptions

Deployment Parameters

Deployment Length (Days):

Expected Number of Beds:

Buffer Percentage (%): Add percentage buffer to quantities (e.g., 10 for 10%)

Pharmaceuticals Requirements

Sort: Min Qty: Non-zero only

0 items loaded

Load Ward Meds or ICU Meds above.

Portable Solution Estimator Suite

Load Calculator Basic

Scenarios

Load Calculator Pro

Scenarios

Water Requirements

Scenarios

Deployment Parameters

Water Use (per bed per day)

Storage Configuration

Potable water

Wastewater

Supply & Disposal Mode

Estimated Totals & Schedule

Potable water

Wastewater

Consumables Supply List

Scenarios

Deployment Parameters

Consumables Requirements

Pharmaceuticals Supply List

Scenarios

Deployment Parameters

Pharmaceuticals Requirements